Ritik Chauhan

Troubleshooting Your Netgear Router If your Netgear router not connecting to internet, it can be frustrating, but several troubleshooting steps can help resolve the issue. Proper Netgear router setup is essential for a stable connection, so let’s go through some common solutions. Initial Setup Steps 1. Check Connections : Ensure that all cables are securely connected. The Ethernet cable should be plugged into the WAN port on the router and the modem. Confirm that the modem is powered on and functioning. 2. Restart Your Devices : Power cycle both your modem and router. Unplug them for about 30 seconds, then plug them back in, starting with the modem. Wait until all lights are stable before turning on the router. 3. Verify Internet Service : Check with your Internet Service Provider (ISP) to ensure there are no outages in your area. If the internet is down, your router won't connect. Configuring Your Netgear Router After confirming hardware connections, make sure the Netgear router setup is correct: 1. Access the Router Interface : Open a web browser and enter "192.168.1.1" or "routerlogin.net" in the address bar. Log in with the default credentials. 2. Run the Setup Wizard : Follow the on-screen instructions to configure your internet settings. Make sure the connection type matches what your ISP requires. If you continue to experience issues with your Netgear router not connecting to internet, consider resetting the router to factory settings or contacting Netgear support for further assistance.